MND Auto Industries

Cardan shaft 150mm. We are the manufacturers of Cardan shaft. We are dealing in Cardan shaft PAN India and also expoting in countries like, Saudi Arabia, South Africa, Dubai, Bangladesh etc.
CARDAN SHAFT AND PROPELLER SHAFT MANUFACTURERS

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

Additional Information:

• Delivery Time: 15-20 DAYS
• Packaging Details: INDIVIDUALLY BUBBLE WRAPPED AND THEN IN PALLET TO AVOID DAMAGES

A heavy-duty cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the engine or transmission of a vehicle to the drivetrain. It is typically used in heavy-duty vehicles such as trucks, buses, and construction equipment that require a robust and durable shaft to handle high levels of torque and stress.

A heavy-duty cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the vehicle goes over rough terrain or makes turns, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, a heavy-duty cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants.

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

Cardan Shaft, we are the manufacturers of Cardan Shaft.

We are providing Cardan Shaft in PAN India.

We are having our happy clients of Cardan Shafts across all India.

Additional Information:

• Delivery Time: 15-20 DAYS
• Packaging Details: INDIVIDUALLY PACKED IN BUBBLE WRAP AND THEN IN PALLET

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used.

Additional Information:

• Item Code: CS0002
• Production Capacity: 100Nos daily
• Delivery Time: 2 days
• Packaging Details: Each Cardan/Propeller shaft is individually packed in Corrugated/Wooden Box and can be customized as per customer's requirement. प्रोपेलर शाफ्ट व्यक्तिगत रूप से नालीदार / लकड़ी के बॉक्स में पैक किया जाता है और ग्राहक की आवश्यकता के अनुसार अनुकूलित किया जा सकता है। ஒவ்வொரு Cardan / Propeller தண்டு தனித்தனியாக நெளிவுடைய / மர பெட்டியில் பேக் மற்றும் வாடிக்கையாளரின் தேவைக்கேற்ப தனிப்பயனாக்கலாம். ప్రతి కార్డన్/ప్రొపెల్లర్ షాఫ్ట్ విడిగా ముడతలు పడిన/చెక్క బాక్సులో ప్యాక్ చేయబడుతుంది మరియు కస్టమర్ యొక్క ఆవశ్యకతకు అనుగుణంగా కస్టమైజ్ చేయవచ్చు. ഓരോ കാർഡൻ/പ്രൊപ്പല്ലർ ഷാഫ്റ്റും കോറുഗേറ്റഡ്/വുഡൻ ബോക്സിൽ വ്യക്തിഗതമായി പായ്ക്ക് ചെയ്യുകയും ഉപഭോക്താവിന്റെ ആവശ്യാനുസരണം ഇഷ്ടാനുസൃതമാക്കുകയും ചെയ്യാം.

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

CARDAN SHAFT AND PROPELLER SHAFT MANUFACTURERS

Additional Information:

• Delivery Time: 15-20 DAYS
• Packaging Details: INDIVIDUALLY BUBBLE WRAPPED AND THEN PACKED IN WHITE CORRUGATED BOXES.

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.
CARDAN SHAFTS AND PROPELLER SAHFT MANUFACTURERS.

Additional Information:

• Delivery Time: 15-20 DAYS
• Packaging Details: INDIVIDUALLY BUBBLE WRAPPED AND THEN PACKED IN WHITE CORRUGATED BOXES

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

CARDAN SHAFT AND PROPELLER SAHFT MANUFACTURERS.

Additional Information:

• Packaging Details: THE PRODUCT IS INDIVIDUALLY BUBBLE WRAPPED AND THEN PACKED IN WHITE CORROGATED BOXES OR PALLET AS NEEDED.

A Cardan shaft, also known as a universal joint shaft or a drive shaft, is a mechanical component used to transmit torque and rotational motion from the engine to the wheels of a vehicle. It is made up of a series of joints that allow for the transfer of power at varying angles.

One of the primary advantages of a Cardan shaft is its ability to transmit torque smoothly, even when there is a misalignment between the transmission and the wheels. This makes it a popular choice for four-wheel drive vehicles and other heavy-duty applications.

However, Cardan shafts do have some limitations. They are prone to vibration and can wear out quickly if not properly maintained. Additionally, they are not well-suited for applications that require high-speed rotation.

Additional Information:

• Delivery Time: 3 to 7 days
• Packaging Details: Each shaft is individually bubble wrapped and then packed in jute covers or white corrugated boxes. the packaging may vary as per the product or as per the buyer's requirement

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 DAYS
• Packaging Details: PALLET

A cardan shaft, also known as a universal joint shaft, is a mechanical component that transmits rotational torque from one shaft to another. It is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts.

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 days
• Packaging Details: As per Requirement

A cardan shaft, also known as a universal joint shaft, is a mechanical component that transmits rotational torque from one shaft to another. It is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts.

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7-10 days
• Packaging Details: As Per Requirement

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

The cardan shaft is comprised of three main components: the input shaft, the output shaft, and the universal joint. The input shaft is the component that receives torque from the power source, such as an engine. The output shaft is the component that delivers the torque to the driven component, such as the wheels of a vehicle. The universal joint connects the input and output shafts and allows for the transfer of torque even when the two shafts are at an angle to one another.

The design of the universal joint allows for the shaft to flex and rotate at an angle, which is crucial in applications where the input and output shafts are not aligned. The universal joint is made up of a cross-shaped component that connects the input and output shafts. Each end of the cross is attached to a yoke, which is a fork-shaped component that allows for the connection to the shafts.

The operation of the cardan shaft is relatively simple. As the input shaft rotates, it transfers torque to the universal joint. The universal joint then transfers the torque to the output shaft, which rotates and delivers the power to the driven component. The cardan shaft is able to transmit torque even when the input and output shafts are at an angle to one another, allowing for a greater range of motion and flexibility in the system.

It is worth noting that the cardan shaft is not without its limitations. Due to the design of the universal joint, there is some degree of backlash and vibration present in the system. Additionally, the cardan shaft is not ideal for applications where precise torque transfer is required, as the flexibility of the joint can result in some loss of power.

In conclusion, the cardan shaft is a mechanical component that is commonly used in automotive and industrial applications to transfer power between two non-collinear shafts. It is comprised of three main components: the input shaft, the output shaft, and the universal joint. While the cardan shaft is not without its limitations, it remains an important and widely used component in many different industries.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As per Requirement

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement

An industrial cardan shaft, also known as a driveshaft or propeller shaft, is a rotating mechanical component that transmits torque and rotational power from the drivetrain of an industrial machine to its working components. It is typically used in heavy-duty industrial equipment such as conveyors, cranes, excavators, and other machinery that require a robust and durable shaft to handle high levels of torque and stress.

An industrial cardan shaft consists of a series of tubes or tubes with a solid center that are connected by universal joints or constant velocity (CV) joints at each end. The joints allow the shaft to flex and move as the machine operates, while the tubes or solid center provide strength and support. The shaft is typically supported by bearings or bushings along its length to reduce friction and wear.

In addition to its strength and durability, an industrial cardan shaft may also be designed for specific applications, such as high-speed or high-torque operations, or for use in harsh environments. It may also incorporate features such as seals, boots, or guards to protect against dirt, moisture, and other contaminants. Industrial cardan shafts are often custom-designed and manufactured to meet the specific requirements of the equipment they are used in.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7-10 Days
• Packaging Details: As Per Requirement